Generac Transfer Switches

Our Generac Transfer Switches are designed for use with single-phase and 3-phase 50Hz generators. The transfer switches are certified for IEC 60947-6-1 – the transfer switch standard – where electronically operated and mechanically interlocked contacts are required for safety.

For the 3 phase switch, the load transfers to the generator when any phase fails, when phase sequence is incorrect, or when there is over or under voltage (±10%).

Generac Transfer Switches are available with steel enclosures for 45 and 70 amp single phase and 3-phase models. The enclosure is RAL 7035 painted, and certified to IEC IP66. The contactors equipped comply with a wide range of certificates and marking, including the CE mark. The controller at the generator senses and controls the timing, exercising, and transfer commands.

Switches available:
70 Amp 230 1Ø NEMA 3R 50Hz CE
45 AMP 400 3Ø NEMA 3R 50Hz CE
Single throw contactors, certified to the transfer switch standard IEC 60947-6-1 with electrically operated, mechanically inter-locking contacts for fast, positive connections
High-endurance, interlocked contactor, suitable for both inductive and resistive loads.
Less than 160 millisecond transfer time. Dual coil design.
Contactors with built-in surge protection. Limited 5 year warranty.

Financial Options Available

Please contact us if you are in need of a financial plan as we have a number of options available.


Always there. Always on.

1800 414 969